Live loads
Contents |
[edit] Introduction
Loads are forces that may cause stresses, deformations, displacement and accelerations on a building. Different types of load can act upon a structure or building element, the nature of which will vary according to design, location, and so on. Assessing loads forms part of an engineer’s structural calculations – a crucial part of ensuring the safe design of building structures and other built assets such as tunnels, bridges and dams. Design requirements are generally specified in terms of the maximum loads that a structure must be able to withstand.
Loads are generally classified as either live loads (LL) or dead loads (DL).
For more information see: Types of load.
[edit] Live loads
Live loads (also known as applied or imposed loads, or variable actions) may vary over time and often result from the occupancy of a structure. Typical live loads may include; people, the action of wind on an elevation, furniture, vehicles, the weight of the books in a library and so on.
A live load can be expressed either as a uniformly distributed load (UDL) or as one acting on a concentrated area (point load). It may eventually be factored into the calculation of gravity loads. In the UK and much of Europe, live loads are expressed as kilo Newtons per square metre (kN/m2) while in the US the unit is pounds per square foot (PSF).
NB Loads such as wind loading are sometimes considered separately from live loads as environmntal loads. For more information see: Types of load.
[edit] Dead loads
In contrast, dead loads (also known as permanent or static loads, or permanent actions) remain relatively constant over time and comprise, for example, the weight of a building’s structural elements, such as beams, walls, roof and flooring components. Dead loads result from the weight of the structure or other fixed elements before any live loads are taken into consideration. They may include permanent non-structural elements such as partitions, immovable fixtures and even built-in cupboards.
Live loads are added to dead loads to give the total loading exerted on a structure.
For more information see: Dead loads.
[edit] Standards
Eurocode BS EN 1991-1-1:2002 Eurocode 1 Actions on structures (General actions. Densities, self-weight, imposed loads for buildings (formerly BS 6399-1:1996)) is the European code of practice for dead and imposed loads and gives guidance on the structural design of buildings.
[edit] Related articles on Designing Buildings
Featured articles and news
Industry survey highlights persistent skills gap
Building engineering business survey by ECA in partnership with BESA, SELECT and SNIPEF.
IHBC Conservation Professional Practice Principles
Spotlighted in HEF Historic Environment Overview.
CIAT collaborates with CIOB, CIfA, Icon to launch The Arc
Helping clients find specialist historic environment professionals.
Government building safety remediation data releases
Show some progress, but a 50% gap not yet started.
Testing For A Safer Future; an initial industry response
A response to the Independent Review of the Construction Product Testing Regime.
Requirements for UK buildings in certain circumstances.
CLC guidance for dutyholders and accountable persons.
Types of contractor in the construction industry
A long list, but are any missing ?
The Housing (Cladding Remediation) (Scotland) Bill 2023
Unanimously approved to legislation on May 14, 2024.
Asset information requirements AIR
In detail, with links to further resources.
Where it's AT Building Safety podcasts from CIAT
Unravelling the Golden Thread and CIAT’s Principal Designer Register for non-HRBs and HRBs.
What happened to Hadrian's Wall?
Its former stones can be found in buildings near its route.
Strategic ventilation in modern building design
Download your free guide.
Four new types of prior approval for solar developments
Online Planning Portal application types from 5 September.